Roof Brackets
$6.80
Need a roof bracket for your roofing project? Badger Ladder’s high-quality yellow fixed roof brackets come in 45, 60, or 90-degree angles and are used as safety guards to prevent workers or items from falling off the edge of a roof during a building project. The product listed here is our yellow roof bracket, however, we also have adjustable brackets available.
Roof Scaffolds for Safer Construction Projects
Besides our fixed and adjustable brackets, Badger Ladder also offers roof scaffolds as part of our roofing equipment products. Our roof scaffolds provide a stable and secure platform for workers to perform roofing tasks. In addition, our other roofing equipment products also include flat roof guard rail systems, chicken ladders, ladder hooks, and more.
Check out our complete selection of roofing equipment products here.
Description
Fixed Roof Brackets & Roof Scaffolds Overview
A fixed roof bracket is a safety guard to prevent you and your workers from possibly falling off a roof while performing work on a construction site. Badger Ladder’s fixed roof brackets are fastened and secured to keep planks in place. Roof brackets can be fixed or adjustable. Meanwhile, roof scaffolds provide a platform for workers to perform roofing tasks safely.
Notes on Installation:
For proper installation of your roof brackets, you should first securely nail them to the rafters. Next, adjust the brackets so that a shingle can be applied over them for when you remove the bracket. Now, you can tap the bottom of the jack with your hatchet until the bracket comes loose. Lastly, you can raise the shingle and nail. For roof scaffolds specifically, you should follow the manufacturer’s instructions carefully to ensure proper installation and safe use.
Commonly Asked Questions About Roof Brackets
What is a roofing bracket?
A roofing bracket, often referred to as a roof jack, is a metal device used in the construction and repair of roofs to provide a stable platform for workers. Roofing brackets are designed to support a plank or scaffold boards, creating a temporary, level work surface on a sloped roof. Roofing brackets are critical for safety, as they significantly reduce the risk of slipping and falling by offering a secure foothold. The design of roofing brackets allows them to be either fixed or adjustable to accommodate different roof pitches, so they can be used on a variety of roof styles.
How should roof brackets be nailed to the roof?
Roof brackets should be securely nailed to the roof to ensure stability and safety. We recommend using at least two 16d (penny) nails or equivalent roofing nails for each bracket. These nails should be driven into the rafters, not just the sheathing, to provide strong support. It’s essential to locate the rafters before beginning installation. The nails should be long enough to penetrate through the sheathing and deeply into the rafters. After the work is completed, the brackets should be carefully removed, and the holes left by the nails should be sealed properly to prevent leaks.
Are roof brackets safe?
Roof brackets are safe when installed and used correctly. They are designed to provide a stable work platform and reduce the risk of falls, which are a common hazard in roof work. Safety, however, depends on proper installation—securing the brackets to the rafters with appropriate nails—and regular maintenance to ensure they are in good condition. Additionally, workers should be trained on how to use them correctly and always follow safety protocols, including the use of personal protective equipment like harnesses.
How far apart should roof brackets be?
The spacing of roof brackets will depend on the load they are expected to support and the length of the planks used for the platform. Generally, roof brackets should be spaced no more than 8 feet apart. For heavier loads or weaker planks, you should reduce the spacing to 4 or 6 feet to ensure that the platform remains stable and does not sag or flex excessively under weight.
Contact Badger Ladder Today
If you have any questions about fixed roof bracket or roof scaffold pricing, shipping, and more, give our team a call today! We are proud to serve all our clients in our Green Bay, WI, Savannah, GA, Tacoma, WA, and Cranbury, NJ locations. Our company is your source for quality roofing equipment, scaffold products, planks, pump jacks, ladders, and more. All our roof brackets and roof scaffolds meet ANSI and OSHA requirements.
Shop roof brackets and other roofing equipment with Badger Ladder today! We have more than 30 years of experience working with scaffolding, ladders, planks, and roofing equipment, just to name a few. Contact our team today.
